Skip to main content

Device Installation

This tutorial is a common installation solution for beacons and gateway devices. Through this tutorial, users can match the best installation solution in most scenarios, reduce the difficulty of installation while ensuring reliability, and improve installation efficiency.

Screw Fixation​

Install Beacon Step 1

info

Please pay attention to construction safety!

When the ceiling thickness is insufficient, the expansion sleeve can be replaced with an aircraft type expansion sleeve

Install Beacon Step 1

Require​

To ensure the positioning effect, the following conditions must be met:

  • Beacons installed on the same plane
  • No obstruction between beacons
  • The side length between beacons is not less than 3 meters
  • The ratio of the longest side to the shortest side does not exceed 3:1